Omicron · Relay testing
Omicron CMGPS 588 GPS Synchronisation Unit
$125 per day ex GST, 1 to 7 days
Per day, AUD ex GST. The rate for your total hire length applies to every day, and the total never drops at a band change. Minimum hire one day. Australia-only hire; freight and handling quoted separately. Hiring for more than 90 days? Call for a long-term rate: 1300 730 499
Work out your hire
Pick your first and last day to see the hire charge.
| 7 days | $875 |
|---|---|
| 14 days | $1,575 |
| 28 days | $2,625 |
| 60 days | $4,725 |
- Delivery or collection
- Freight Australia-wide, quoted with availability, or collect from Hobart, Launceston, Adelaide or Newcastle. Urgent? Call 1300 730 499 rather than send the form.
- Datasheet
- Manufacturer's datasheet (PDF). Calibration certificate supplied with the instrument.
Overview
About the Omicron CMGPS 588 GPS Synchronisation Unit
Description
The CMGPS 588 is a precision GPS time synchronisation unit developed for use with Omicron’s range of CMC test sets. It provides accurate time signals to enable synchronised testing of protection relays, IEDs, and substation automation systems, particularly within IEC 61850 environments. The unit acts as a grand master clock using PTP (Precision Time Protocol) over a single Ethernet cable. Its compact, antenna-integrated design and Power over Ethernet functionality make it ideal for on-site use in digital substations and distributed testing scenarios.
Features
- Integrated GPS antenna with rugged outdoor housing
- Provides PTP (IEEE 1588-2008 Power Profile) time synchronisation over Ethernet
- Compatible with CMC test sets including CMC 356, 353, 430, and 500
- Provides time synchronisation for IEC 61850 GOOSE and Sampled Values testing
- Powered via Power over Ethernet (PoE) for simple field setup
- Lightweight and portable – ideal for on-site substation use
- Capable of synchronising multiple test devices or IEDs
- Minimal configuration required – plug and play setup
- Supports extended cable lengths up to approx. 95 metres
Specifications
| GNSS receiver | 32 channel, integrated active antenna |
|---|---|
| Timing accuracy | ±100 ns to reference time (TAI or UTC) |
| Timing protocol | PTP Power Profile to IEEE 1588-2008 and IEEE C37.238-2011 (fixed configuration) |
| Connection | Single Ethernet cable, 15 m standard, up to 95 m with optional cable drums |
| Power supply | Power over Ethernet, below 2 W |
| Dimensions | 115.5 mm diameter, 106.2 mm high (without mast kit or tripod) |
| Weight | Less than 500 g |
| Environmental rating | IP67, operating -40 to +70 °C |
| Mounting | Mast kit (permanent roof installation) or tripod (temporary) |
Manufacturer's published specifications. Your quote confirms the configuration supplied.
What’s in the case
- CMGPS 588 unit
- GPS antenna and mounting accessories
- Power over Ethernet (PoE) adapter
- Connection and data cables
- User guide
- Rugged carry case
Calibration
All Megavar test equipment is maintained under a documented calibration programme. Instruments are calibrated either by external calibration laboratories or in-house against reference standards that are themselves laboratory-calibrated, with measurement traceable to Australian national measurement standards held by the National Measurement Institute. A current calibration certificate is available on request. If your project requires a specific calibration interval, test standard, or documentation for a client submission, tell us at enquiry on 1300 730 499 and we will confirm what applies before you commit.
Often hired with
Related Equipment For Hire
Why hire from Megavar
A Tailored Hire Experience That Works for You
At Megavar, our dedicated test equipment hire division provides high-quality electrical testing instruments for both short and long-term use. Our team makes sure you receive the right tools, ready to go, every time. From fast dispatch to door-to-door freight, our hiring process is streamlined to get you up and running quickly and confidently.
- Rapid delivery and collectionDoor-to-door freight for minimal downtime
- Fast, simple bookingsPlace an order and we’ll handle the rest
- Fault supportIf a set plays up, call us and we will arrange a fix or a replacement.
Our 3-step easy process
Hiring Made Easy in 3 Simple Steps
Step 1: Request a Quote
Submit your rental request online, and our team will respond promptly with availability and pricing.
Step 2: Organise Your Rental
Once confirmed, we’ll quickly process your booking and dispatch the equipment. Delivery and collection can be arranged to suit your schedule.
Step 3: Use with Confidence
Supplied with the manufacturer’s manuals. If a set plays up, call us and we will arrange a fix or a replacement.
How the hire works
Hire terms in brief
After you enquire
We confirm availability, rates and freight in a written quote, valid for the period it states (usually 14 days). An enquiry or quote does not reserve equipment: the hire is booked when your purchase order, signed quote or email acceptance reaches us.
Hire period
Our carrier: up to 72 hours of transit each way is not charged as hire. Hire starts at delivery or 72 hours after dispatch, whichever is earlier, and ends at handover to our carrier or 72 hours before the equipment arrives back, whichever is later. Delay caused by us or our carrier is not charged. For example, dispatched Monday 10am and delivered Wednesday 2pm: hire starts Wednesday 2pm. Routes that normally take longer than 72 hours are marked on the quote. Your own freight: hire runs from handover to your carrier at our office until the equipment arrives back at our office. Collect in person: from collection to return.
Extensions and early return
Contact us before the return deadline to extend; your quoted rates stay fixed and extended hire is invoiced every 7 days. Return early and you pay only for the days used, at the rate band for the days actually hired.
Delivery and returns
Freight for each leg, the handling fee and any express dispatch are on the quote, before you accept. Returns go to the dispatching office named on the quote, by carrier or in person, never by post.
Counter times
Returned to our counter before 9am on a business day counts as the previous day. Collected after 4pm on a business day, hire starts the next day. Weekends and public holidays count as hire days.
Calibration and checks
Supplied in working order with listed accessories, leads and manuals. Each measuring instrument is calibrated, and its current NATA-traceable calibration certificate is available on request. If calibration falls due during your hire, we tell you before dispatch.
Cancelling or moving a booking
Cancel 5 or more business days before dispatch or collection and nothing is charged. With 2 to 4 business days’ notice, the charge is the greater of one day’s hire and 5% of the booked hire; with less notice, the greater of one day’s hire and 10%. You can ask once to move the start by up to 30 days, with at least 2 business days’ notice.
Loss, damage and insurance
The equipment is your responsibility, other than fair wear and tear, from the start of hire until it is back with us, including in transit, up to the replacement value cap shown on the quote for each item. No damage waiver is offered. We recommend you insure the equipment for its replacement value.
Payment and bond
Account customers pay each invoice within 14 days. Without a credit account, or paying by card, you pay the booked hire, freight, handling fee and any bond before dispatch. A bond applies only where the quote states one, and is refunded after return and inspection, less anything owed.
Summary of our Terms and Conditions: Test Equipment Hire. Full hire terms
Downloads
Enquire about Omicron CMGPS 588 GPS Synchronisation Unit Hire
When and where do you need it?
Send your hire dates and delivery location and we will confirm availability and lead time by the end of the next business day.
Or call us directly on 1300 730 499
Need help with your rental?
1300 730 499 We’re available Monday to Friday, 8:30 am to 5:00 pm. Urgent hire: call rather than send the form. rentals@megavar.com.auQuestions about this hire?
Call 1300 730 499 for availability, rates and booking. If a set plays up during the hire, call us and we will arrange a fix or a replacement. Counter collection and returns 8:30 am to 5:00 pm, Monday to Friday.
FAQ
Frequently Asked Questions
Omicron CMGPS 588 GPS Synchronisation Unit
What is the CMGPS 588 used for?
It provides a GPS-based time signal to Omicron CMC test sets and IEDs to enable accurate time synchronisation during protection relay and IEC 61850 system testing.
Which devices is it compatible with?
The CMGPS 588 is compatible with Omicron CMC 356, 353, 430, and 500, as well as any test equipment or IEDs that accept PTP (IEEE 1588 Power Profile) time synchronisation.
Why do I need GPS synchronisation?
Precise timing is essential when conducting time-critical tests involving GOOSE messaging, Sampled Values, or coordination between multiple relays and devices.
Does it require configuration or software?
No. It is designed for plug-and-play operation. Once powered via PoE and placed in an area with sky visibility, it automatically synchronises with GPS satellites.
Where should the unit be installed?
The unit must be installed outdoors or near a window with clear sky access. It cannot operate properly indoors without satellite visibility.
Can it be used to synchronise multiple test sets?
Yes. It can act as a grand master clock for multiple devices, ensuring synchronised test triggering and time-stamped event capture.
What’s included in the rental?
- CMGPS 588 unit
- GPS antenna and mounting accessories
- Power over Ethernet (PoE) adapter
- Connection and data cables
- Rugged carry case and user guide
What support comes with the hire?
Each instrument is supplied with the manufacturer’s manuals. If a set plays up, call us and we will arrange a fix or a replacement.
What’s the minimum hire period?
The minimum hire is one day. The daily rate steps down for hires of 8 days or more, and longer project hires can be quoted on 1300 730 499.
Do you deliver across Australia?
Yes. We offer nationwide delivery and pickup options. You may also arrange your own freight.
Explore Our Services
High voltage testing and commissioning of substations, transformers, cables and switchgear by Megavar's own engineers, from five offices. Call 1300 730 499.
BESS maintenance and testing across Australia. Keep your battery energy storage system safe, available and performing with Megavar. Enquire today.
Wind farm EBoP maintenance and testing by Megavar – relay testing, transformer condition assessment, switchgear servicing, and DGA monitoring. Australia-wide.
Trusted by top enterprises for exceptional results
Testing guides
Related testing guides
Protection Relay Testing: Secondary Injection, Test Intervals and the Standards That Apply
Protection relay testing proves that the relays guarding a substation, feeder or generator will trip when they should and stay stable when they should not. This…
Secondary Isolation: CT Shorting Links, Test Blocks and Trip Isolation for Protection Testing
Secondary isolation separates the protection, control and metering circuits under test from the circuits that stay in service. This guide sets out the principles: CT shorting…
CT Testing: A Field Guide to Ratio, Polarity, Excitation and Burden Tests on Current Transformers
CT testing proves that a current transformer has the ratio and polarity on its nameplate, a healthy magnetic core and sound secondary insulation. This guide explains…