Equipment hire
Megger Test Equipment for Hire Australia
Day rates, 1 to 7 days, ex GST:
- Megger MIT515/2 5kV Insulation Resistance Tester$120
- Megger MIT1025/2 10kV Insulation Resistance Tester$135
- Megger DLRO 10A Micro-Ohmmeter$70
- Megger DLRO 100EB Micro-Ohmmeter$155
Every rate band is on the instrument page. Minimum hire one day.
Rates per day, ex GST
Megger Equipment Available for Hire
Each instrument is supplied with its manuals. If one plays up, call us and we will arrange a fix or a replacement. No computer is supplied: where an instrument needs software, install it on your own computer.
The Megger MIT515/2 is a 5 kV insulation resistance tester from Megger's 2024 Essential range, used for insulation testing of cables, motors, generato…
$120/day, 1 to 7 days
$75.60/day for 29 to 90 days
The Megger MIT1025/2 is a 10 kV diagnostic insulation resistance tester from Megger's 2024 Advanced range. It tests at 500 V to 10 kV, or at a user-se…
$135/day, 1 to 7 days
$85.05/day for 29 to 90 days
The DLRO 10A is a high-precision digital low resistance ohmmeter designed to measure very low resistance values with exceptional accuracy and repeatab…
$70/day, 1 to 7 days
$44.10/day for 29 to 90 days
The Megger DLRO 100EB is a rugged, portable 100 A digital low-resistance ohmmeter engineered for high-accuracy micro-ohm measurements in high-voltage …
$155/day, 1 to 7 days
$97.65/day for 29 to 90 days
The DLRO 600A is a high‑current micro‑ohmmeter engineered for measuring extremely low resistances under real high‑current conditions. With test curren…
$185/day, 1 to 7 days
$116.55/day for 29 to 90 days
The Megger MOM3 is a 300 A handheld micro-ohmmeter: a powerful, portable instrument designed to measure very low resistances (typically in micro-ohms)…
$155/day, 1 to 7 days
$97.65/day for 29 to 90 days
The TM1600 is a powerful and highly configurable circuit breaker timing analyser designed for precise timing measurements on medium- and high-voltage …
$305/day, 1 to 7 days
$192.15/day for 29 to 90 days
The Torkel 930 by Megger is a high-performance battery discharge test set designed for load testing of substation and industrial battery banks. It ena…
$395/day, 1 to 7 days
$248.85/day for 29 to 90 days
The TXL870 is a high-capacity extra load unit designed to expand the discharge capability of Megger’s Torkel battery load testers, such as the Torkel …
$155/day, 1 to 7 days
$97.65/day for 29 to 90 days
Calibration
All Megavar test equipment is maintained under a documented calibration programme. Instruments are calibrated either by external calibration laboratories or in-house against reference standards that are themselves laboratory-calibrated, with measurement traceable to Australian national measurement standards held by the National Measurement Institute. A current calibration certificate is available on request. If your project requires a specific calibration interval, test standard, or documentation for a client submission, tell us at enquiry on 1300 730 499 and we will confirm what applies before you commit.
Need High Voltage Testing or Equipment?
Tell us what you need and when, and we will come back with availability and pricing.
About megger test equipment for hire australia hire
Megger Test Equipment for Hire Australia hire, in more detail
Introduction
Our Megger rental fleet complements our Omicron equipment range, giving you access to the right tool for every testing application. Whether you need the TM1600 for circuit breaker timing analysis, an MIT insulation tester or a DLRO micro-ohmmeter, Megavar has the Megger equipment for your project.
All Megger equipment is supplied calibrated, with test leads and accessories, and current calibration certificates are available on request. Flexible hire periods and Australia-wide delivery are available from our depots in Tasmania, South Australia and New South Wales.
Why Hire Megger Equipment from Megavar?
Megavar’s engineers use both Omicron and Megger equipment on commissioning projects across Australia, giving us practical familiarity with the full Megger range.
Before you get to site
Capability statement
Test Equipment Rental
The HV test equipment hire fleet by category, with calibration, hire terms and delivery.
How the hire works
Hire terms in brief
After you enquire
We confirm availability, rates and freight in a written quote, valid for the period it states (usually 14 days). An enquiry or quote does not reserve equipment: the hire is booked when your purchase order, signed quote or email acceptance reaches us.
Hire period
Our carrier: up to 72 hours of transit each way is not charged as hire. Hire starts at delivery or 72 hours after dispatch, whichever is earlier, and ends at handover to our carrier or 72 hours before the equipment arrives back, whichever is later. Delay caused by us or our carrier is not charged. For example, dispatched Monday 10am and delivered Wednesday 2pm: hire starts Wednesday 2pm. Routes that normally take longer than 72 hours are marked on the quote. Your own freight: hire runs from handover to your carrier at our office until the equipment arrives back at our office. Collect in person: from collection to return.
Extensions and early return
Contact us before the return deadline to extend; your quoted rates stay fixed and extended hire is invoiced every 7 days. Return early and you pay only for the days used, at the rate band for the days actually hired.
Delivery and returns
Freight for each leg, the handling fee and any express dispatch are on the quote, before you accept. Returns go to the dispatching office named on the quote, by carrier or in person, never by post.
Counter times
Returned to our counter before 9am on a business day counts as the previous day. Collected after 4pm on a business day, hire starts the next day. Weekends and public holidays count as hire days.
Calibration and checks
Supplied in working order with listed accessories, leads and manuals. Each measuring instrument is calibrated, and its current NATA-traceable calibration certificate is available on request. If calibration falls due during your hire, we tell you before dispatch.
Cancelling or moving a booking
Cancel 5 or more business days before dispatch or collection and nothing is charged. With 2 to 4 business days’ notice, the charge is the greater of one day’s hire and 5% of the booked hire; with less notice, the greater of one day’s hire and 10%. You can ask once to move the start by up to 30 days, with at least 2 business days’ notice.
Loss, damage and insurance
The equipment is your responsibility, other than fair wear and tear, from the start of hire until it is back with us, including in transit, up to the replacement value cap shown on the quote for each item. No damage waiver is offered. We recommend you insure the equipment for its replacement value.
Payment and bond
Account customers pay each invoice within 14 days. Without a credit account, or paying by card, you pay the booked hire, freight, handling fee and any bond before dispatch. A bond applies only where the quote states one, and is refunded after return and inspection, less anything owed.
Summary of our Terms and Conditions: Test Equipment Hire. Full hire terms
Enquire about Megger Equipment Hire
Check availability
Send your hire dates and delivery location and we will confirm availability and lead time by the end of the next business day.
Or call us directly on 1300 730 499
Need help with your rental?
1300 730 499 We’re available Monday to Friday, 8:30 am to 5:00 pm. Urgent hire: call rather than send the form. rentals@megavar.com.auFAQ
Frequently Asked Questions for Megger Test Equipment
Can I hire Megger insulation testers for motor and generator testing?
Does Megavar offer both Omicron and Megger equipment for the same application?
How quickly can Megavar deliver Megger hire equipment?
For an urgent hire, call 1300 730 499: next-morning delivery by Virgin Cargo is often possible, depending on your location and stock. Regional and remote delivery times depend on the freight route. Contact us to discuss your timeline and we’ll confirm the fastest delivery option.
Do you provide calibration certificates with Megger hire equipment?
Explore Our Services
High voltage testing and commissioning of substations, transformers, cables and switchgear by Megavar's own engineers, from five offices. Call 1300 730 499.
Circuit breaker testing across Australia. Timing, travel, contact resistance and insulation diagnostics on HV breakers by Megavar commissioning engineers.
Power transformer testing and commissioning across Australia. Ratio, winding resistance, SFRA, tan delta and oil diagnostics with a 200+ item test fleet.
Trusted by top enterprises for exceptional results
