Omicron · Relay testing
Omicron CMLIB REF6xx Interface Adapter
$125 per day ex GST, 1 to 7 days
Per day, AUD ex GST. The rate for your total hire length applies to every day, and the total never drops at a band change. Minimum hire one day. Australia-only hire; freight and handling quoted separately. Hiring for more than 90 days? Call for a long-term rate: 1300 730 499
Work out your hire
Pick your first and last day to see the hire charge.
| 7 days | $875 |
|---|---|
| 14 days | $1,575 |
| 28 days | $2,625 |
| 60 days | $4,725 |
- Delivery or collection
- Freight Australia-wide, quoted with availability, or collect from Hobart, Launceston, Adelaide or Newcastle. Urgent? Call 1300 730 499 rather than send the form.
- Datasheet
- Manufacturer's datasheet (PDF). Calibration certificate supplied with the instrument.
Overview
About the Omicron CMLIB REF6xx Interface Adapter
Description
CMLIB REF6xx is an interface adapter for connecting ABB protection relays with sensor inputs (e.g. REF615 or REF601) to the low level outputs of CMC test sets. For Rogowski sensor simulation, CMLIB REF6xx converts the low-level output signals of the CMC into differential (balanced) signals. In addition, the adapter also provides the simulated voltage system.
CMLIB REF6xx can be used in combination with CMC 356, CMC 353, CMC 256plus, CMC 256-6, and CMC 850 test sets.
Features
- Provides interface between CMC test sets and ABB REF6xx series relays
- Supports REF615, REF601, and similar relays with sensor inputs
- Converts low-level outputs into differential signals for Rogowski coil simulation
- Simulates both current and voltage signals for comprehensive relay testing
- Enables realistic testing of ABB sensors without additional equipment
- Compact and lightweight for ease of transport and field use
- Compatible with multiple Omicron CMC models: 356, 353, 256plus, 256-6, and 850
- No external power source required
- Simplifies sensor-based relay testing, reducing setup complexity
Specifications
| Function | Interface adapter between CMC low-level outputs and ABB Relion relays with sensor inputs |
|---|---|
| Compatible relays | ABB Relion relays fitted with sensor inputs (e.g. REF615, REX640) |
| Current simulation | Rogowski sensor simulation, CMC low-level outputs converted to differential (balanced) signals |
| Voltage simulation | Simulated voltage system provided by the adapter |
| Order number | P0006379 |
Manufacturer's published specifications. Your quote confirms the configuration supplied.
What’s in the case
- CMLIB REF6xx adapter
- Connection leads
- Protective case
Calibration
All Megavar test equipment is maintained under a documented calibration programme. Instruments are calibrated either by external calibration laboratories or in-house against reference standards that are themselves laboratory-calibrated, with measurement traceable to Australian national measurement standards held by the National Measurement Institute. A current calibration certificate is available on request. If your project requires a specific calibration interval, test standard, or documentation for a client submission, tell us at enquiry on 1300 730 499 and we will confirm what applies before you commit.
Often hired with
Related Equipment For Hire
Why hire from Megavar
A Tailored Hire Experience That Works for You
At Megavar, our dedicated test equipment hire division provides high-quality electrical testing instruments for both short and long-term use. Our team makes sure you receive the right tools, ready to go, every time. From fast dispatch to door-to-door freight, our hiring process is streamlined to get you up and running quickly and confidently.
- Rapid delivery and collectionDoor-to-door freight for minimal downtime
- Fast, simple bookingsPlace an order and we’ll handle the rest
- Fault supportIf a set plays up, call us and we will arrange a fix or a replacement.
Our 3-step easy process
Hiring Made Easy in 3 Simple Steps
Step 1: Request a Quote
Submit your rental request online, and our team will respond promptly with availability and pricing.
Step 2: Organise Your Rental
Once confirmed, we’ll quickly process your booking and dispatch the equipment. Delivery and collection can be arranged to suit your schedule.
Step 3: Use with Confidence
Supplied with the manufacturer’s manuals. If a set plays up, call us and we will arrange a fix or a replacement.
How the hire works
Hire terms in brief
After you enquire
We confirm availability, rates and freight in a written quote, valid for the period it states (usually 14 days). An enquiry or quote does not reserve equipment: the hire is booked when your purchase order, signed quote or email acceptance reaches us.
Hire period
Our carrier: up to 72 hours of transit each way is not charged as hire. Hire starts at delivery or 72 hours after dispatch, whichever is earlier, and ends at handover to our carrier or 72 hours before the equipment arrives back, whichever is later. Delay caused by us or our carrier is not charged. For example, dispatched Monday 10am and delivered Wednesday 2pm: hire starts Wednesday 2pm. Routes that normally take longer than 72 hours are marked on the quote. Your own freight: hire runs from handover to your carrier at our office until the equipment arrives back at our office. Collect in person: from collection to return.
Extensions and early return
Contact us before the return deadline to extend; your quoted rates stay fixed and extended hire is invoiced every 7 days. Return early and you pay only for the days used, at the rate band for the days actually hired.
Delivery and returns
Freight for each leg, the handling fee and any express dispatch are on the quote, before you accept. Returns go to the dispatching office named on the quote, by carrier or in person, never by post.
Counter times
Returned to our counter before 9am on a business day counts as the previous day. Collected after 4pm on a business day, hire starts the next day. Weekends and public holidays count as hire days.
Calibration and checks
Supplied in working order with listed accessories, leads and manuals. Each measuring instrument is calibrated, and its current NATA-traceable calibration certificate is available on request. If calibration falls due during your hire, we tell you before dispatch.
Cancelling or moving a booking
Cancel 5 or more business days before dispatch or collection and nothing is charged. With 2 to 4 business days’ notice, the charge is the greater of one day’s hire and 5% of the booked hire; with less notice, the greater of one day’s hire and 10%. You can ask once to move the start by up to 30 days, with at least 2 business days’ notice.
Loss, damage and insurance
The equipment is your responsibility, other than fair wear and tear, from the start of hire until it is back with us, including in transit, up to the replacement value cap shown on the quote for each item. No damage waiver is offered. We recommend you insure the equipment for its replacement value.
Payment and bond
Account customers pay each invoice within 14 days. Without a credit account, or paying by card, you pay the booked hire, freight, handling fee and any bond before dispatch. A bond applies only where the quote states one, and is refunded after return and inspection, less anything owed.
Summary of our Terms and Conditions: Test Equipment Hire. Full hire terms
Enquire about Omicron CMLIB REF6xx Interface Adapter Hire
When and where do you need it?
Send your hire dates and delivery location and we will confirm availability and lead time by the end of the next business day.
Or call us directly on 1300 730 499
Need help with your rental?
1300 730 499 We’re available Monday to Friday, 8:30 am to 5:00 pm. Urgent hire: call rather than send the form. rentals@megavar.com.auQuestions about this hire?
Call 1300 730 499 for availability, rates and booking. If a set plays up during the hire, call us and we will arrange a fix or a replacement. Counter collection and returns 8:30 am to 5:00 pm, Monday to Friday.
FAQ
Frequently Asked Questions
Omicron CMLIB REF6xx Interface Adapter
What does the CMLIB REF6xx do?
It acts as an interface between Omicron CMC test sets and ABB protection relays with sensor inputs, allowing accurate simulation of Rogowski coils and voltage signals.
Which relays is it compatible with?
It is specifically designed for ABB relays such as REF615 and REF601, which require differential sensor input simulation.
Which CMC test sets are supported?
The adapter works with CMC 356, CMC 353, CMC 256plus, CMC 256-6, and CMC 850.
Does it simulate both current and voltage signals?
Yes. It handles low-level current simulation (Rogowski-type) and provides voltage simulation as well, enabling complete relay test procedures.
Is an external power supply required?
No. The adapter operates passively and draws power directly from the CMC test set connection.
Is it suitable for field testing?
Yes. It’s compact, easy to carry, and ideal for both field and laboratory applications.
Do I need any additional software or drivers?
No additional software is typically required. It operates as a hardware interface directly through the CMC system and Omicron Test Universe software.
What support comes with the hire?
Each instrument is supplied with the manufacturer’s manuals. If a set plays up, call us and we will arrange a fix or a replacement.
What’s included in the rental package?
The standard rental includes the CMLIB REF6xx adapter, necessary connection leads, and a protective case. Additional accessories can be arranged upon request.
Explore Our Services
HV reticulation and distribution design across Australia: overhead and underground networks, URD, powerline design and DNSP-ready drafting, 415V to 132kV.
HV substation design and engineering across Australia: primary plant, secondary protection and SCADA. Megavar designs and delivers the full package.
On-site resonant hipot testing of HV cables, GIS and power transformers to 500 kV, with partial discharge, on Megavar-owned sets. Call 1300 730 499.
Trusted by top enterprises for exceptional results
Testing guides
Related testing guides
Protection Relay Testing: Secondary Injection, Test Intervals and the Standards That Apply
Protection relay testing proves that the relays guarding a substation, feeder or generator will trip when they should and stay stable when they should not. This…
Secondary Isolation: CT Shorting Links, Test Blocks and Trip Isolation for Protection Testing
Secondary isolation separates the protection, control and metering circuits under test from the circuits that stay in service. This guide sets out the principles: CT shorting…
CT Testing: A Field Guide to Ratio, Polarity, Excitation and Burden Tests on Current Transformers
CT testing proves that a current transformer has the ratio and polarity on its nameplate, a healthy magnetic core and sound secondary insulation. This guide explains…