Phenix Technologies · Circuit breaker testing
Phenix BK130 130 kV Hipot Test Set
$375 per day ex GST, 1 to 7 days
Per day, AUD ex GST. The rate for your total hire length applies to every day, and the total never drops at a band change. Minimum hire one day. Australia-only hire; freight quoted separately. Hiring for more than 90 days? Call for a long-term rate: 1300 730 499
Work out your hire
Pick your first and last day to see the hire charge.
| 7 days | $2,625 |
|---|---|
| 14 days | $4,725 |
| 28 days | $7,875 |
| 60 days | $14,175 |

- Delivery or collection
- Freight Australia-wide, quoted with availability, or collect from Hobart, Launceston, Adelaide or Newcastle. Urgent? Call 1300 730 499 rather than send the form.
- Datasheet
- Manufacturer's datasheet (PDF). Calibration certificate supplied with the instrument.
Overview
About the Phenix BK130 130 kV Hipot Test Set
Description
The BK130 High Voltage Withstand Test Set is a portable AC dielectric test system capable of generating up to 130 kV at 50 mA (5 minute duty), 33.3 mA (1 hour duty), or 25 mA (continuous) on the high-voltage tap; up to 36 kV at 180 mA / 120 mA / 90 mA on the lower tap, for testing the insulation strength of high-voltage cables, switchgear, transformers, insulators, and related equipment. Designed for field and factory testing, it is ideal for performing withstand (hipot) tests during commissioning, routine maintenance, or post-repair inspections. The BK130 system includes a high-voltage tank and a separate low-voltage control unit, providing enhanced operator safety, test flexibility, and compliance with international standards.
Features
• Output voltage up to 130 kV AC at 50 mA (5 minute duty), 33.3 mA (1 hour) or 25 mA continuous
• Suitable for dielectric withstand (hipot) testing of HV assets
• Two-piece design with separate control and HV units
• Smooth manual voltage control with zero start interlock
• Accurate metering of voltage and leakage current
• Overload and short-circuit protection for safe operation
• Ideal for testing HV cables, GIS, switchgear, bushings, motors, and transformers
• Air-insulated, rugged construction for outdoor and substation use
• Supplied with HV output lead, grounding lead, and transport case
Specifications
| Output voltage | 0 to 130 kV AC (HV output), 0 to 36 kV AC (liner tap) |
|---|---|
| Output current, 5 min on, 15 min off | 50 mA at 130 kV, 180 mA at 36 kV |
| Output current, 1 h on, 1 h off | 33.3 mA at 130 kV, 120 mA at 36 kV |
| Output current, continuous | 25 mA at 130 kV, 90 mA at 36 kV |
| Metering accuracy | 0.8% of reading plus 0.2% of range |
| Current meter ranges | 0 to 200 µA, 2 mA, 20 mA and 200 mA |
| Input supply | 110 to 120 V, 30 A or 220 to 240 V, 15 A, 50/60 Hz |
| Weight | Control unit 22 kg, HV tank 81 kg, cart 32 kg |
| Operating conditions | 10 to 40 °C, humidity below 95% non-condensing, altitude below 1,000 m |
Manufacturer's published specifications. Your quote confirms the configuration supplied.
What’s in the case
- BK130 high-voltage tank
- Control unit
- Interconnecting cables
- HV output cable
- Earth lead
- Transport and storage case
Calibration
All Megavar test equipment is maintained under a documented calibration programme. Instruments are calibrated either by external calibration laboratories or in-house against reference standards that are themselves laboratory-calibrated, with measurement traceable to Australian national measurement standards held by the National Measurement Institute. A current calibration certificate is available on request. If your project requires a specific calibration interval, test standard, or documentation for a client submission, tell us at enquiry on 1300 730 499 and we will confirm what applies before you commit.
Why hire from Megavar
A Tailored Hire Experience That Works for You
At Megavar, our dedicated test equipment hire division provides high-quality electrical testing instruments for both short and long-term use. Our team makes sure you receive the right tools, ready to go, every time. From fast dispatch to door-to-door freight, our hiring process is streamlined to get you up and running quickly and confidently.
- Rapid delivery and collectionDoor-to-door freight for minimal downtime
- Fast, simple bookingsPlace an order and we’ll handle the rest
- Fault supportIf a set plays up, call us and we will arrange a fix or a replacement.
Our 3-step easy process
Hiring Made Easy in 3 Simple Steps
Step 1: Request a Quote
Submit your rental request online, and our team will respond promptly with availability and pricing.
Step 2: Organise Your Rental
Once confirmed, we’ll quickly process your booking and dispatch the equipment. Delivery and collection can be arranged to suit your schedule.
Step 3: Use with Confidence
Supplied with the manufacturer’s manuals. If a set plays up, call us and we will arrange a fix or a replacement.
How the hire works
Hire terms in brief
After you enquire
We confirm availability, rates and freight in a written quote, valid for the period it states (usually 14 days). An enquiry or quote does not reserve equipment: the hire is booked when your purchase order, signed quote or email acceptance reaches us.
Hire period
When we ship with our carrier, time in transit is not charged as hire. For a remote location (Remote or Very Remote Australia on the ABS Remoteness Areas map), up to 96 hours of transit each way is not charged. Delays caused by us or our carrier are not charged. Your own freight: hire runs from handover to your carrier at our office until the equipment arrives back at our office. Collect in person: from collection to return.
Extensions and early return
Contact us before the return deadline to extend; your quoted rates stay fixed and extended hire is invoiced every 7 days. Return early and you pay only for the days used, at the rate band for the days actually hired.
Delivery and returns
Freight for each leg is on the quote before you accept. Returns go to the dispatching office named on the quote, by carrier or in person, never by post.
Counter times
Returned to our counter before 9am on a business day counts as the previous day. Collected after 4pm on a business day, hire starts the next day. Weekends and public holidays count as hire days.
Calibration and checks
Supplied in working order with listed accessories, leads and manuals. Each measuring instrument is calibrated, and its current NATA-traceable calibration certificate is available on request. If calibration falls due during your hire, we tell you before dispatch.
Cancelling or moving a booking
Cancel 5 or more business days before dispatch or collection and nothing is charged. With 2 to 4 business days’ notice, the charge is the greater of one day’s hire and 5% of the booked hire; with less notice, the greater of one day’s hire and 10%. You can ask once to move the start by up to 30 days, with at least 2 business days’ notice.
Loss, damage and insurance
You are responsible for the equipment, other than fair wear and tear, from the start of hire until it is back with us, including in transit. Loss or damage is charged at the reasonable cost of repair or replacement. We recommend you insure the equipment for its replacement value.
Payment and bond
Account customers pay each invoice within 14 days. Without a credit account, or paying by card, you pay the booked hire, freight and any bond before dispatch. A bond applies only where the quote states one, and is refunded after return and inspection, less anything owed.
Summary of our Terms and Conditions: Test Equipment Hire. Full hire terms
Enquire about Phenix BK130 130 kV Hipot Test Set Hire
When and where do you need it?
Send your hire dates and delivery location and we will confirm availability and lead time by the end of the next business day.
Or call us directly on 1300 730 499
Need help with your rental?
1300 730 499 We’re available Monday to Friday, 8:30 am to 5:00 pm. Urgent hire: call rather than send the form. rentals@megavar.com.auQuestions about this hire?
Call 1300 730 499 for availability, rates and booking. If a set plays up during the hire, call us and we will arrange a fix or a replacement. Counter collection and returns 8:30 am to 5:00 pm, Monday to Friday.
FAQ
Frequently Asked Questions
Phenix BK130 130 kV Hipot Test Set
What is the BK130 used for?
The BK130 is used for AC dielectric withstand (hipot) testing, applying high voltage to confirm the insulation strength of electrical components such as cables, switchgear, and transformers.
What is its maximum output?
It can deliver up to 130 kV AC at 50 mA (5 minute duty), 33.3 mA (1 hour) or 25 mA continuous, suitable for testing high-voltage installations and components
What types of equipment can it test?
It is ideal for power cables, transformers, switchgear, motors, rotating machines, bushings, insulators, and GIS assemblies.
Is it compliant with standards?
Yes. It is suitable for withstand testing in accordance with IEC 60060, IEEE 4, IEEE C57.12.90, and other insulation testing standards.
Is it safe for use in the field?
Yes. It features a two-piece design with a grounded control unit separate from the HV tank, plus safety features like overload protection, HV-on indicators, and interlocks.
What’s included in the rental?
The rental includes the BK130 high-voltage tank, control unit, interconnecting cables, HV output cable, earth lead, and transport/storage case.
What support comes with the hire?
Each instrument is supplied with the manufacturer’s manuals. If a set plays up, call us and we will arrange a fix or a replacement.
What is the minimum hire duration?
The minimum hire is one day. The daily rate steps down for hires of 8 days or more, and longer project hires can be quoted on 1300 730 499.
Do you deliver across Australia?
Yes. We provide nationwide delivery and pickup. You may also arrange your own freight if preferred.
Is insurance or a deposit required?
A security deposit may apply. For high-voltage test sets like this, we may request proof of business insurance. All conditions are provided in your quote.
Explore Our Services
Trusted by top enterprises for exceptional results



ex GST, 1 to 7 days Check availability