Phenix Technologies · Circuit breaker testing

Phenix BK130 130 kV Hipot Test Set

$375 per day ex GST, 1 to 7 days

1 to 7 days$375
8 to 14 days$337.50
15 to 28 days$281.25
29 to 90 days$236.25

Per day, AUD ex GST. The rate for your total hire length applies to every day, and the total never drops at a band change. Minimum hire one day. Australia-only hire; freight quoted separately. Hiring for more than 90 days? Call for a long-term rate: 1300 730 499

Work out your hire

Pick your first and last day to see the hire charge.

Typical hire totals, AUD ex GST
7 days$2,625
14 days$4,725
28 days$7,875
60 days$14,175
Check availability
Need it this week? Call 1300 730 499
Phenix BK130 130 kV Hipot Test Set
Delivery or collection
Freight Australia-wide, quoted with availability, or collect from Hobart, Launceston, Adelaide or Newcastle. Urgent? Call 1300 730 499 rather than send the form.
Datasheet
Manufacturer's datasheet (PDF). Calibration certificate supplied with the instrument.
Australian engineering teamCalibrated with NATA-traceable certificatesSupplied with manufacturer’s manualsAustralia-wide delivery

Overview

About the Phenix BK130 130 kV Hipot Test Set

Description

The BK130 High Voltage Withstand Test Set is a portable AC dielectric test system capable of generating up to 130 kV at 50 mA (5 minute duty), 33.3 mA (1 hour duty), or 25 mA (continuous) on the high-voltage tap; up to 36 kV at 180 mA / 120 mA / 90 mA on the lower tap, for testing the insulation strength of high-voltage cables, switchgear, transformers, insulators, and related equipment. Designed for field and factory testing, it is ideal for performing withstand (hipot) tests during commissioning, routine maintenance, or post-repair inspections. The BK130 system includes a high-voltage tank and a separate low-voltage control unit, providing enhanced operator safety, test flexibility, and compliance with international standards.

Features

• Output voltage up to 130 kV AC at 50 mA (5 minute duty), 33.3 mA (1 hour) or 25 mA continuous
• Suitable for dielectric withstand (hipot) testing of HV assets
• Two-piece design with separate control and HV units
• Smooth manual voltage control with zero start interlock
• Accurate metering of voltage and leakage current
• Overload and short-circuit protection for safe operation
• Ideal for testing HV cables, GIS, switchgear, bushings, motors, and transformers
• Air-insulated, rugged construction for outdoor and substation use
• Supplied with HV output lead, grounding lead, and transport case

Specifications

Output voltage0 to 130 kV AC (HV output), 0 to 36 kV AC (liner tap)
Output current, 5 min on, 15 min off50 mA at 130 kV, 180 mA at 36 kV
Output current, 1 h on, 1 h off33.3 mA at 130 kV, 120 mA at 36 kV
Output current, continuous25 mA at 130 kV, 90 mA at 36 kV
Metering accuracy0.8% of reading plus 0.2% of range
Current meter ranges0 to 200 µA, 2 mA, 20 mA and 200 mA
Input supply110 to 120 V, 30 A or 220 to 240 V, 15 A, 50/60 Hz
WeightControl unit 22 kg, HV tank 81 kg, cart 32 kg
Operating conditions10 to 40 °C, humidity below 95% non-condensing, altitude below 1,000 m

Manufacturer's published specifications. Your quote confirms the configuration supplied.

What’s in the case

  • BK130 high-voltage tank
  • Control unit
  • Interconnecting cables
  • HV output cable
  • Earth lead
  • Transport and storage case

Calibration

All Megavar test equipment is maintained under a documented calibration programme. Instruments are calibrated either by external calibration laboratories or in-house against reference standards that are themselves laboratory-calibrated, with measurement traceable to Australian national measurement standards held by the National Measurement Institute. A current calibration certificate is available on request. If your project requires a specific calibration interval, test standard, or documentation for a client submission, tell us at enquiry on 1300 730 499 and we will confirm what applies before you commit.

Why hire from Megavar

A Tailored Hire Experience That Works for You

At Megavar, our dedicated test equipment hire division provides high-quality electrical testing instruments for both short and long-term use. Our team makes sure you receive the right tools, ready to go, every time. From fast dispatch to door-to-door freight, our hiring process is streamlined to get you up and running quickly and confidently.

See our Equipment

  • Rapid delivery and collectionDoor-to-door freight for minimal downtime
  • Fast, simple bookingsPlace an order and we’ll handle the rest
  • Fault supportIf a set plays up, call us and we will arrange a fix or a replacement.

Our 3-step easy process

Hiring Made Easy in 3 Simple Steps

1

Step 1: Request a Quote

Submit your rental request online, and our team will respond promptly with availability and pricing.

2

Step 2: Organise Your Rental

Once confirmed, we’ll quickly process your booking and dispatch the equipment. Delivery and collection can be arranged to suit your schedule.

3

Step 3: Use with Confidence

Supplied with the manufacturer’s manuals. If a set plays up, call us and we will arrange a fix or a replacement.

How the hire works

Hire terms in brief

After you enquire

We confirm availability, rates and freight in a written quote, valid for the period it states (usually 14 days). An enquiry or quote does not reserve equipment: the hire is booked when your purchase order, signed quote or email acceptance reaches us.

Hire period

When we ship with our carrier, time in transit is not charged as hire. For a remote location (Remote or Very Remote Australia on the ABS Remoteness Areas map), up to 96 hours of transit each way is not charged. Delays caused by us or our carrier are not charged. Your own freight: hire runs from handover to your carrier at our office until the equipment arrives back at our office. Collect in person: from collection to return.

Extensions and early return

Contact us before the return deadline to extend; your quoted rates stay fixed and extended hire is invoiced every 7 days. Return early and you pay only for the days used, at the rate band for the days actually hired.

Delivery and returns

Freight for each leg is on the quote before you accept. Returns go to the dispatching office named on the quote, by carrier or in person, never by post.

Counter times

Returned to our counter before 9am on a business day counts as the previous day. Collected after 4pm on a business day, hire starts the next day. Weekends and public holidays count as hire days.

Calibration and checks

Supplied in working order with listed accessories, leads and manuals. Each measuring instrument is calibrated, and its current NATA-traceable calibration certificate is available on request. If calibration falls due during your hire, we tell you before dispatch.

Cancelling or moving a booking

Cancel 5 or more business days before dispatch or collection and nothing is charged. With 2 to 4 business days’ notice, the charge is the greater of one day’s hire and 5% of the booked hire; with less notice, the greater of one day’s hire and 10%. You can ask once to move the start by up to 30 days, with at least 2 business days’ notice.

Loss, damage and insurance

You are responsible for the equipment, other than fair wear and tear, from the start of hire until it is back with us, including in transit. Loss or damage is charged at the reasonable cost of repair or replacement. We recommend you insure the equipment for its replacement value.

Payment and bond

Account customers pay each invoice within 14 days. Without a credit account, or paying by card, you pay the booked hire, freight and any bond before dispatch. A bond applies only where the quote states one, and is refunded after return and inspection, less anything owed.

Summary of our Terms and Conditions: Test Equipment Hire. Full hire terms

Enquire about Phenix BK130 130 kV Hipot Test Set Hire

When and where do you need it?

Send your hire dates and delivery location and we will confirm availability and lead time by the end of the next business day.

Or call us directly on 1300 730 499

Dates and alternatives
Delivery or collection

* Required. This asks for availability and a price; it does not reserve the equipment. We reply by the end of the next business day. Hire within Australia only.

Megavar Pty Ltd (ABN 88 104 344 765) collects these details to check availability, quote your hire, arrange delivery or collection and keep a record of it, and to understand how enquiries reach us. If you do not provide them we may not be able to quote. We may share them with our IT, email and business system providers, with freight carriers for delivery and collection, and, where relevant, our insurers and professional advisers, and some of those providers store or process information outside Australia, including in the United States. Our Privacy Policy explains how we handle your information and how to access or correct it or make a complaint.

Need help with your rental?

1300 730 499 We’re available Monday to Friday, 8:30 am to 5:00 pm. Urgent hire: call rather than send the form. rentals@megavar.com.au

Questions about this hire?

Call 1300 730 499 for availability, rates and booking. If a set plays up during the hire, call us and we will arrange a fix or a replacement. Counter collection and returns 8:30 am to 5:00 pm, Monday to Friday.

1300 730 499
rentals@megavar.com.au

FAQ

Frequently Asked Questions
Phenix BK130 130 kV Hipot Test Set

What is the BK130 used for?

The BK130 is used for AC dielectric withstand (hipot) testing, applying high voltage to confirm the insulation strength of electrical components such as cables, switchgear, and transformers.

What is its maximum output?

It can deliver up to 130 kV AC at 50 mA (5 minute duty), 33.3 mA (1 hour) or 25 mA continuous, suitable for testing high-voltage installations and components

What types of equipment can it test?

It is ideal for power cables, transformers, switchgear, motors, rotating machines, bushings, insulators, and GIS assemblies.

Is it compliant with standards?

Yes. It is suitable for withstand testing in accordance with IEC 60060, IEEE 4, IEEE C57.12.90, and other insulation testing standards.

Is it safe for use in the field?

Yes. It features a two-piece design with a grounded control unit separate from the HV tank, plus safety features like overload protection, HV-on indicators, and interlocks.

What’s included in the rental?

The rental includes the BK130 high-voltage tank, control unit, interconnecting cables, HV output cable, earth lead, and transport/storage case.

What support comes with the hire?

Each instrument is supplied with the manufacturer’s manuals. If a set plays up, call us and we will arrange a fix or a replacement.

What is the minimum hire duration?

The minimum hire is one day. The daily rate steps down for hires of 8 days or more, and longer project hires can be quoted on 1300 730 499.

Do you deliver across Australia?

Yes. We provide nationwide delivery and pickup. You may also arrange your own freight if preferred.

Is insurance or a deposit required?

A security deposit may apply. For high-voltage test sets like this, we may request proof of business insurance. All conditions are provided in your quote.

Explore Our Services

BESS maintenance and testing across Australia. Keep your battery energy storage system safe, available and performing with Megavar. Enquire today.

On-site resonant hipot testing of HV cables, GIS and power transformers to 500 kV, with partial discharge, on Megavar-owned sets. Call 1300 730 499.

SCADA and RTU commissioning for substations and renewables. Point-to-point testing, protocol integration and HMI verification by Megavar engineers.

Trusted by top enterprises for exceptional results

AusNet logo - Megavar clientABB logo - Megavar clientElectraNet logo - Megavar clientFluence logo - Megavar clientRJE Global logo - Megavar clientNYRStar logo - Megavar clientSchneider Electric logo - Megavar clientAcciona logo - Megavar clientRBD Electrical logo - Megavar clientVentia logo - Megavar clientGrange logo - Megavar clientAlcoa logo - Megavar clientZinfra logo - Megavar client Bison Energy Company logo - Megavar client Hydro Tasmania logo - Megavar client TasNetworks logo - Megavar clientVestas logo - Megavar client Goldwind logo - Megavar client Downer logo - Megavar client ENERVEN logo - Megavar client Genus logo - Megavar client
$375/day
ex GST, 1 to 7 days
Check availability